A standard Microfleur refill contains 4 pieces: 2 wool felt pads and 2 cotton liners - not a new press. I’d check your press size and the listed contents before ordering.
- Choose the right size: Regular fits the 5-by-5-inch press; Max fits the 9-by-9-inch press.
- Check what’s included: A refill replaces both soft layers. A liner-only set has no wool pads; a complete kit includes the press hardware.
- Keep the hardware separate: Refills don’t include platens or clips. Regular uses 2 clips; Max uses 4.
- Replace based on condition: Wash dirty liners, but replace torn or heat-damaged ones. Replace pads that are flattened, uneven, or scorched.
My rule: <u>check fit, contents, and condition</u>. Keep the layers dry between uses, follow the stacking instructions, and stop using damaged parts.
Using the Microfleur - How to Press Flowers In the Microwave
sbb-itb-80d8183
What Comes in a Microfleur Refill Pack
Microfleur Refill Contents and Layer Order
A Microfleur refill pack includes 1 pair of wool felt pads and 1 pair of cotton liners - 4 pieces total. Platens and clips aren’t included.
| Component | Quantity | Material | Position | Function |
|---|---|---|---|---|
| Wool felt pads - included | 2 | Wool | Between the platen and cotton liner | Cushion flowers, spread pressure evenly, and absorb moisture |
| Cotton liners - included | 2 | Cotton lawn | Directly against the flowers | Hold plant material in place and separate it from the felt |
| Platens - not included | 2 | Plastic | Top and bottom exterior | Provide rigid support for the press |
| Clips - not included | 2 for Regular; 4 for Max | Plastic | Around the platens | Hold the press closed |
2 Wool Felt Pads
The thick wool felt pads sit outside the cotton liners. They cushion flowers, spread pressure evenly, and absorb moisture released during microwaving.
2 Cotton Liners
The cotton lawn liners touch the flowers directly, keeping them in place and separated from the felt.
How to Stack the Press Layers
Stack from bottom to top: lower platen → wool pad → cotton liner → flowers → cotton liner → wool pad → upper platen. Then clip the press closed.
Next, match the refill to your press size.
Regular and Max Refills: Choose the Right Size
Match the refill to your press model, then choose the pack that includes the parts you need. Start with the size label.
| Refill pack | Compatible press | Listed press size | Contents |
|---|---|---|---|
| Regular | Microfleur Regular | 5 x 5 inches | 2 wool felt pads and 2 cotton liners |
| Max | Microfleur Max | 9 x 9 inches | 2 wool felt pads and 2 cotton liners |
Regular Refills for the 5-by-5-Inch Press
The listed size refers to the platen footprint - not the cut size of the inserts. Check the current listing for exact insert dimensions. The refill replaces only the soft inner layers.
Max Refills for the 9-by-9-Inch Press
A Max refill won’t turn a Regular press into a Max press. It replaces only the soft inner layers; the platens and clips determine the press size. Inserts that are too small leave gaps, while oversized inserts can prevent the press from closing.
How Refills, Liner Sets, and Complete Kits Differ
Choose based on which parts you need to replace, not the size name alone.
| Product type | Listed components | When to choose it |
|---|---|---|
| Standard refill pack | 2 wool felt pads and 2 cotton liners | You need both types of soft inserts. |
| Liner-only set | Cotton liners only; check the listing for quantity | You need liners but not wool pads. |
| Complete press kit | Platens, clips, and a refill pack | You need the press hardware and the inserts. |
Before buying, check the current Microfleur listing to confirm compatibility and included items. Liner-only sets don’t include wool pads.
Next, check which press parts wear out separately.
Parts to Replace Separately and Signs of Wear
Refills cover the soft inserts. Clips and platens need separate replacement.
| Component | Replacement route |
|---|---|
| Clips | Buy replacement clips separately. |
| Platens | Contact Microfleur for replacement options if damaged. |
Clips, Platens, and Instructions
Beyond the refill layers, only hardware and documentation may need separate replacement. Replace damaged clips separately from the soft layers. Refill packs usually don’t include printed instructions, so download the model-specific manual from Microfleur’s website if needed.
When Pads and Liners Need Replacing
Replace wool pads that are compressed flat, uneven, contaminated, or scorched. Cleaning won’t restore damaged pads.
Replace liners with tears or heat damage. Wash liners that have residue or pollen; permanent staining alone doesn’t mean they need replacing.
Cleaning, Drying, and Safety Checks
Hand-wash cotton liners and lay them flat to dry. Keep the interior layers fully dry between microwave flower pressing sessions.
Before each use, make sure clips close securely and check platens for cracks or warping. Stop using any damaged component. If you smell scorching wool, stop the microwave immediately and handle the hot press cautiously.
Conclusion: Refill Buying Checklist
A standard Microfleur refill includes 2 wool felt pads and 2 cotton lawn liners. It replaces only the soft inner layers. Platens and clips are sold separately.
Check these details before buying to make sure the refill fits your press and you have all the parts you need.
- Size: Regular fits the 5-by-5-inch press; Max fits the 9-by-9-inch press.
- Contents: Look for 2 wool felt pads and 2 cotton lawn liners. Liner-only sets don’t include wool pads.
- Clips: Regular uses 2 clips; Max uses 4.
- Hardware: Replace cracked or missing platens and clips separately.
FAQs
Can I replace just one pad or liner?
You can replace just one liner if it’s damaged or badly stained. Refill packs include two wool pads and two cotton liners. You can also buy liners separately or in bulk bundles.
For a stained liner, try hand-washing it and pressing it flat. If it’s charred or worn thin, replace it to protect your flowers and the press components.
How can I tell if my wool pads are fully dry?
After each session, separate the wool pads from the other press layers and let them dry completely. The pads should feel dry to the touch before reuse. If they still feel damp or have a noticeable odor, they aren’t ready.
Before starting another microwave cycle, check that both pads and liners are dry. Damp layers can trap moisture and potentially ruin your next project.
How should I store unused refill pads and liners?
Store unused wool pads and cotton liners flat in a clean, dry place. After each use, separate the layers and let them dry completely before storing them. Trapped moisture can damage them.
Keep liners smooth. Wrinkles can lead to uneven contact during pressing. Permanent stains are normal, but remove debris and pollen before storage to help keep the pads and liners working well.
