Your Microfleur microwave flower press comes as a complete kit and is ready to use. It also includes a comprehensive User Guide. 

Your times will be affected by the power of your microwave.  Always start with imperfect flowers/foliage.  This will allow you to test times without ruining your best specimens.  We recommend starting with short times such as 25 seconds for the first burst, until you are assured you can use longer timed bursts without burning your flowers, liners and pads. Always wipe the platens between bursts.  When little moisture accumulates on the platens, your flowers will be dry or almost dry. Succeeding bursts after the first should generally be of shorter duration. 

Lift corner of the pad/liner to check your flowers.  They will feel papery when dry, should be somewhat stiff and will not droop when lifted.  Flowers petals which are not dry enough will pucker and center moisture may leach into (and discolor) the petals.  Keep log for each type of flower you press.  This will give you a starting guide for the next time you press the same flower.  The pressing time for the same flower may vary from one day to the next due to changing moisture content.  After you have had a bit of practice you will better be able to judge pressing times and you will be able to tell quite easily if more pressing is needed.

Microfleur presses help to retain color better than traditional presses.  Color retention will vary based on the the type of specimen being pressed and how fresh your specimens are when pressed, and how they is stored.  Generally, stronger colors such as red roses, yellow daffodils, blue delphiniums and lobelia, etc., will keep their color for years, whereas, paler shades and older blooms may fade after a few months and may even discolor slightly in the press.  Sunlight, florescent lights, and moisture are major culprits so store your flowers and works of art carefully.

Permanent liner stains are normal and will not affect succeeding batches.  It is always best to press the lightest color flowers first, and stamens last. The cotton lawn liners will require washing or replacing as they will stain and retain pollen which can transfer to your next batch of flowers.  Extra liners may be purchased on our website.  Liners should be hand washed and laid smoothed flat to dry.  They can be pressed with an iron or misted and pressed in your Microfleur press. 

White PVA glue (such as Aileen’s) works well.  It can be used to glue the flowers as well as to coat them, if desired.  Coating flowers with glue after the design is completed on agreeting card, for example, will make them less fragile for mailing and help prevent them from fading.  Disappearing purple glue sticks (such as 3-M) work well for short life projects, such as greeting cards.  You will be able to see where you applied the glue, apply your flower, and any excess glue will dry clear. 

You can even do without glue for some projects, such as tags and bookmarks, by laying out your design on your paper and then very carefully laying clear contact paper over your project piece and trimming off the excess.

They are best stored, after completely dry, on blotting or other acid free paper enclosed in a plastic sleeve or bag, and placed in a plastic sealable container such as a plastic shoe box.  It is also beneficial, especially in humid climates, to add rechargeable silica gel to your storage container.  It is sold loose or in canisters, which are ideal. 

You can accommodate longer items such as ferns and long leaves by clipping two 5” presses together.  Lay the two presses adjacent to each other, add your frond or leaf and assemble the presses by adding clips on each end and on the sides where the presses meet.  You will need to turn off the turntable in your microwave.  Ferns press quite quickly, so test times with an imperfect specimen. Fern blades will especially come in handy when you find you did not press enough leaves to complete a project.

Almost anything will burn if it gets too hot.  The most common reason for burned flowers, pads and liners is a pressing time that is too long.  If you mean to put the press in for an additional 20 seconds and type in 200 (more than 3 minutes) by mistake, your pads will likely burn.  Always lightly mist your pads before starting (you can also wet your hand and rub it on your pads).

Never leave a press in your microwave unattended.  The pads are wool and will emit a bad odor when scorching.  Should you smell this odor, open your microwave door immediately. Use caution removing the press as it may be hot.  Our presses are meant for adults and children should not use them without supervision.  That being said, when directions are followed, burning pads is not a normal occurrence.  Should you burn your liners and pads, you may easily order replacements on here or from any of our retailers.

You can download user manuals and print it at home. To download, click on the flag on the country's language that you want.

We are a small, women owned business based in Wisconsin, USA. All orders are shipped from here.

We accept PayPal, Visa, MasterCard, Discover, and American Express but feel free to contact us for other payment options.

We will send tracking information to the e-mail address associated with your order once the item has shipped. If you have not received your tracking information and it has been over 3 business days, please contact us at info@microfleur.com

When ordering as a gift for someone, be sure to enter in your email address to receive all summary information but enter in the recipient’s name and shipping information. We will be sure to keep all prices and receipts out of the package.

We ship worldwide. Here is our shipping policy.